Washing machines error codes

Bosch E16 means the washer door is open.

Bosch E19 means the heating time was exceeded.

Bosch E20 means unexpected heating was detected.

Bosch E23 means the AquaStop leakage-protection hose was activated.

Bosch E25 means the turbidity sensor has an issue.

Bosch E26 means the analogue pressure sensor has an issue.

Bosch E28 means the flow sensor has an issue.

Bosch F16 means the washer door is open.

Bosch F19 means the heating time was exceeded.

Bosch F20 means unexpected heating was detected.

Bosch F23 means the AquaStop leakage-protection hose was activated.

Bosch F25 means the turbidity sensor has an issue.

Bosch F26 means the analogue pressure sensor has an issue.

Bosch F27 means the pressure sensor has an issue.

Bosch F28 means the flow sensor has an issue.

Frigidaire E1 means a top-loading washer is not filling, or is filling too slowly.

Frigidaire E2 means a top-loading washer is taking too long to drain or is not draining properly.

LG Cd is a status showing that the washer-dryer drying cycle completed and is in cool down.

LG CE means the washer detected an over-current condition in the motor electrical circuit.

LG CL means the washer Child Lock or Control Lock function is active.

LG dE means the front-load washer door is not closed properly.

LG FE means the washer detected an overfill condition.

LG LE means the washer tub failed to spin and the motor could not operate properly.

LG PF means the washer's power supply was interrupted during a cycle.

LG Sud means the washer detected too many suds and added a suds-reduction cycle.

LG tCL is a reminder that it is time to run the Tub Clean cycle.

LG tE means the washer detected a heating error, usually involving the thermistor.

Maytag dET means the detergent cartridge is not detected in the dispenser on select front-load washer models.

Maytag drn means the washer is not draining properly.

Maytag HC means the hot and cold inlet hoses are reversed or both water supplies are not fully available.

Maytag Int is a status shown while a paused or canceled washer cycle is stopping and draining.

Maytag lid means the washer lid was left open.

Maytag LOC means the front-load washer Control Lock is active.

Maytag Ofb means the load is out of balance and the washer is running a correction routine.

Maytag rL means items were detected in the washer during the Clean Washer cycle.

Maytag Sud means the washer detected excessive suds and is extending rinsing to remove them.

Samsung 0C means the washer detected too much water.

Samsung 1C means the washer detected a water-level or leakage condition.

Samsung 4C means water is not entering the washer correctly.

Samsung 4C2 means the washer detects excessively hot water at the cold-water supply.

Samsung 5C means water is not draining from the washer at the correct speed or at all.

Samsung 9C1 means the washer detected irregular supply voltage.

Samsung Cb means the washer is in calibration mode.

Samsung dC means the washer does not detect its door as closed and locked on covered models.

Samsung UE means the washer cannot complete the cycle because the load is unbalanced.

Samsung Ur is a status showing the washer is retrying an unbalanced load.

Whirlpool F5E1 is a front-load washer door-switch error.

Whirlpool F7E1 indicates that a front-load washer's motor cannot reach the speed required for the selected cycle.

Whirlpool PF means a top-load HE washer cycle was interrupted by a power failure.