Appliance Code Check

Whirlpool · Washing machine

F7E1

Power reset only

error code

Whirlpool F7E1 indicates that a front-load washer's motor cannot reach the speed required for the selected cycle.

Market, product family, and model applicability

US · en-US · Whirlpool front-load washers covered by the cited US Product Help article

product family applicable: The official source applies at the product-family level. Exact controls can still vary by model.

Check the official model/manual lookup (opens in a new tab)

What you can do now

Confirm the external shipping bolts and spacers were removed during installation, consult the installation instructions, and perform the documented five-minute power reset.

  1. Confirm that the four external shipping bolts and plastic spacers were removed during installation; consult the installation instructions.
  2. Disconnect the washer from power for five minutes, then reconnect it.

Stop and get service when

Contact Whirlpool or schedule service if the installation check and power reset do not resolve F7E1.

  • Contact Whirlpool or schedule service if F7E1 remains.

Do not do

Do not access the motor, wiring, or internal components.

Do not access the motor or internal components; limit checks to installation confirmation and the power reset, then schedule service.

If the message returns

If F7E1 remains after installation confirmation and the reset, contact Whirlpool or schedule service.

Source and scope

Official manufacturer source
Market and locale
US · en-US
Product family
front-load washers
Official source last checked
July 22, 2026
Review status
Automated evidence review completed · Owner-delegated approval

Whirlpool

F7 E1 - Front Load Washer · Official support article

Open official source (opens in a new tab)

Does the model or source look wrong?

Send a privacy-minimal correction signal. It cannot change public content automatically.

Report a model or source mismatch

Evidence-compatible related displays

Same model family

Whirlpool · Washing machine

F5E1

error code

Power reset only

Whirlpool F5E1 is a front-load washer door-switch error.

Read verified guidance

Need a different display? Return to the decoder.