Appliance Code Check

Maytag · Dryer

PF

Status message — no fault indicated

status message

Maytag PF indicates a power failure interrupted the drying cycle.

Display form
PF
Lookup normalization
PF
Alternate forms
None retained in the official record

Check the display exactly as shown. The decoder ignores case and spaces, but it never substitutes O/0, I/1, or S/5.

Official meaning, scoped to this source

Maytag PF indicates a power failure interrupted the drying cycle.

Manufacturer
Maytag
Document
Error Codes in Dryers · Official error-code index
Product family
Maytag dryers
Market and locale
US · en-US

This is an official-source interpretation for the stated scope, not a confirmed diagnosis. Meaning can change across brands, models, product families, and markets.

Market, product family, and model applicability

US · en-US · Maytag dryers covered by the cited official US Product Help table

Exact model applicability has not been verified.

This release retains family or source-index scope only. Do not infer that an arbitrary model uses this code; confirm it in the exact manufacturer manual.

Open the official model/manual lookup (opens in a new tab)

Status message guidance

Restart the cycle or clear PF from the control panel.

  1. Touch and hold Start to restart the cycle, or press Power to clear PF.

This display is not a fault. Separate signs such as smoke, flooding, sparks, or a burning smell require the manufacturer's safety instructions.

Do not do

Do not remove panels, test voltage, access wiring, or disassemble the dryer.

Limit checks to controls, the lint screen, and the accessible exterior vent.

If the message returns

Contact Maytag if PF remains.

Source and scope

Official source verified at release
Market and locale
US · en-US
Product family
Maytag dryers
Content and safety verified on
July 26, 2026
Source updated by manufacturer
Not supplied in the official record

Maytag

Error Codes in Dryers · Official error-code index

Open official source (opens in a new tab)

Verification and review status

  • Content meaning and safety verifiedJuly 26, 2026
  • Source reachability statusOfficial source verified at release
  • Automated evidence review completedPassed · July 26, 2026
  • Automated safety rules checkPassed for this published safety boundary
  • Human technical reviewPending — no human completion is claimed
  • Publication gateAutomated publication checks passed · July 26, 2026
  • Official-source conflictNo unresolved conflict admitted to this public release

Automated checks and release approval are not a substitute for a qualified service professional or the exact manufacturer manual.

Evidence used for this guidance

  • PF table row

    Source-backed summary

    PF: a power failure interrupted the drying cycle; the table provides the supported control, airflow, electrician, or restart action.

Does the model or source look wrong?

Send a privacy-minimal correction signal. It cannot change public content automatically.

Report a model or source mismatch

Need a different display? Return to the decoder.