Bosch · Dishwasher
Bosch Dishwasher E15 Code: Meaning & Troubleshooting
Stop use and isolate nowProfessional service requiredalert
Bosch E15 means the dishwasher safety switch detected water in the base and activated leak protection.
First thing to do
Turn off the dishwasher water inflow.
Can I keep using it? Keep the water inflow off and do not open the dishwasher base.
DIY level: Stop — professional guidance required
See the stop instructionsInteractive troubleshooter
Follow the official checks one at a time. A code and your answers do not confirm a failed part.
Model number (optional)
Brand / appliance verified. Exact model not checked.
Scope: Bosch dishwashers covered by the cited official US support page. Model stays in this tab; it is excluded from analytics.
Stop — professional guidance recommended
Turn off the dishwasher water inflow.
Keep the water inflow off and do not open the dishwasher base.
Bosch directs E15 to Customer Support after the water inflow is turned off.
Bosch E15 means the dishwasher safety switch detected water in the base and activated leak protection. The source does not establish which component has failed from these answers. Do not continue into electrical testing, gas work, wiring, or disassembly.
Give support the model, displayed code, and checks listed below. Check warranty coverage before paying for service. A written quote lets you compare repair with replacement.
Repair or Replace?Your check history
No checks completed yet.
Stop use and isolate now
If you notice smoke, a burning smell, sparks, flooding, gas odor, severe overheating, or electric-shock risk, stop using the appliance and follow the manufacturer's safety instructions. Do not wait for this page or email support.
Water off
The source directs the water supply to be turned off.
Bosch directs E15 to Customer Support after the water inflow is turned off.
- Contact Bosch Customer Support for E15 assistance.
Official meaning, scoped to this source
Bosch E15 means the dishwasher safety switch detected water in the base and activated leak protection.
- Manufacturer
- Bosch
- Document
- Bosch Dishwasher Error Codes · Official error-code index
- Product family
- dishwashers covered by the US error-code index
- Market and locale
- US · en-US
This is an official-source interpretation for the stated scope, not a confirmed diagnosis. Meaning can change across brands, models, product families, and markets.
Market, product family, and model applicability
US · en-US · Bosch dishwashers covered by the cited official US support page
Exact model applicability has not been verified.
This release retains family or source-index scope only. Do not infer that an arbitrary model uses this code; confirm it in the exact manufacturer manual.
Open the official model/manual lookup (opens in a new tab)Do not do
Do not remove the base, bypass leak protection, or run another cycle from this guide.
Keep the water inflow off and do not open the dishwasher base.
Check warranty before authorizing service
Warranty coverage depends on the country, model, purchase date, and manufacturer terms. Have the model and serial number available, open the manufacturer's official support or warranty page, and ask whether the service route is authorized before paying for work.
This public record does not make a coverage determination. Use the official model lookup and warranty information linked below.
If the message returns
With the water inflow off, contact Bosch Customer Support.
Source and scope
Official source verified at release- Market and locale
- US · en-US
- Product family
- dishwashers covered by the US error-code index
- Content and safety verified on
- July 26, 2026
- Source updated by manufacturer
- Not supplied in the official record
Bosch
Bosch Dishwasher Error Codes · Official error-code index
Open official source (opens in a new tab)Verification and review status
- Content meaning and safety verifiedJuly 26, 2026
- Source reachability statusOfficial source verified at release
- Automated evidence review completedPassed · July 26, 2026
- Automated safety rules checkPassed for this published safety boundary
- Human technical reviewPending — no human completion is claimed
- Publication gateAutomated publication checks passed · July 26, 2026
- Official-source conflictNo unresolved conflict admitted to this public release
Automated checks and release approval are not a substitute for a qualified service professional or the exact manufacturer manual.
Evidence used for this guidance
Error Code E15 row
Source-backed summary
E15 means the safety switch detected water in the dishwasher base and leak protection activated. Turn off water inflow and contact Bosch Customer Support.
Does the model or source look wrong?
Send a privacy-minimal correction signal. It cannot change public content automatically.
Report a model or source mismatchNeed a different display? Return to the decoder.